提前计划!
RTD检讨, 许可证, 许可证程序可能需要几个月才能完成,而且不能保证每一步都能获得批准.
RTD收到像你每个月的许多请求,我们没有一个快速处理的选项.
更具体和完整的请求包, 我们就能越快开始你的申请程序.
RTD staff is here to help you understand these procedures but it is your responsibility to follow each step through.
RTD ROW协议策略
所有官方建筑申请都需要发送给RTD房地产部门. RTD拥有并拥有ROW的优先权利,我们在ROW中运营我们的许多列车走廊, 公交线路, Park-n-Rides, 办公室, 商店, 以及维护设施. ROW Agreement Requests must be submitted any time proposed work involves contractors working on/在 RTD ROW or RTD facilities.
向RTD提交的协议请求包需要包括:
- 致RTD ROW的信函,说明工作地点, 工作细节, 施工方法, 并说明是否要对ROW进行临时或永久更改
- 图纸(平面图/剖面图)显示您建议的工作和RTD ROW和RTD设施(e.g.,轨道或公园游乐设施)
- 任何现有地役权、协议或先前权利要求的副本
- RTD 铁路road Utility Agreement - Application Data Sheet (if entering RTD RR ROW or crossing RTD tracks with a utility)
提交协议请求和问题至:
RTD房地产经理
科罗拉多州丹佛市百老汇街1560号650室,邮编80202
电子邮件: (电子邮件保护)
- 协议请求包首先由房地产部门审查, 然后分发给多个RTD部门进行审查.
- RTD工程将与您一起修改您的设计,直到它符合RTD的要求和标准. 审查 time depends on the quality and completeness of your submitted design package and the number of conflicts with RTD systems.
- 公用事业工作需要一个额外的程序——参见 公用事业建设及协议.
- 在所有RTD部门完成审查之后,如果/当您的协议请求获得批准时, RTD不动产和RTD Legal将开始撰写您的协议(60-90天).
- 您必须根据已执行公用事业协议(UA)的条款和UA的附录(e)构建您的新公用事业.g.、计划/轮廓、计算等.). 如果在UA执行后进行了更改, 您的工作将被停止,直到提交新的请求包和更新的设计展品, RTD工程部批准新设计, RTD不动产执行修改后的UA. 审核和执行将需要额外的时间. 可能会收取额外费用.
在RTD协议执行之前,不能保证最终批准.
轻轨轨道(LRT)通行政策
停止! 你有吗? 批准的RTD协议 在适当的位置? 所有请求必须以RTD不动产开头.
申请轻轨通行许可证
为了获得轻轨通行许可,进入或在轻轨线路上工作, 填妥的电子进入许可申请必须电邮至 (电子邮件保护) 不迟于工作开始前一周的星期三中午. 轻轨通行许可申请最多需要7天的审核时间.
当您提交请求时, attendance is also required at the weekly Access Allocation meeting which is held every Wednesday at 2:00 p.m. 位于科罗拉多州丹佛市1350里约热内卢Court的RTD道路维修设施,邮编80204. 如果没有代表出席会议,该请求将不予批准.
从2022年9月14日开始,每周访问分配会议将通过团队进行. 承包商将在提交许可证时收到参赛队的邀请函.
在轻轨上进行经批准的工作
在收到所有必要的批准后, the work may be completed in accordance with the cautions and conditions indicated on the approved LRT access permit.
Work can begin when all personnel that will be in the ROW have completed the RTD On-Track Safety Training certification (消防人员安全训练) 而且认证没有过期. The completed and approved LRT access permit must be in the possession of the work party at the work site at all times.
轻轨通行许可证上标明的允许工作时间(次数)是估算值. Actual starting and ending times may vary depending on the work progress and the requirements for safe train operation. 控制器有权在必要时进行修改, provided there is mutual agreement by the permit holder and the controller and that the revision is documented by the controller. No other information on the form can be changed without approval of the Manager of Light 铁路 Transportation and the Manager of Maintenance of Way or their designees.
The proper notification of work to be performed in the Right-Of-Way (ROW) is essential for safe and efficient operations. RTD 铁路 ROW is defined as the track way area located in between the restricted fenced area or within 10 feet of the nearest rail of any track where no defined restricted area is present. 这包括将在任何轨道之上或之下执行的工作, 以及在任何RTD ROW和/或限制围栏区域的上方或下方. 如果您的工作在任何RTD LRT轨道25英尺内,请与我们联系.
RTD通勤铁路轨道(CRT)访问政策
RTD通勤铁路通行权许可申请表格必须在以下时间提交:
- 工作由承包商在RTDC ROW上、跨、上或下进行.
- Work is being performed by maintenance/engineering that may affect CRT train movements or personnel working on the RTDC ROW.
- 除紧急情况外,任何原因都无法通行.
停止! 你有吗? 批准的RTD协议 在适当的位置? 所有请求必须以RTD不动产开头.
RTD有两个通勤铁路集团(见 铁路地图)
- RTDC-NM(用于地铁北线或N线)
- RTDC-DTO(适用于科罗拉多大学A线、B线、G线所有鹰轨走廊)
申请CRT进入许可
RTDC-NM(用于北线走廊)
在申请CRT-NM访问许可之前,请确保您具备以下条件:
- Suncor同意信批准你的工作
- Zayo认可你的工作
- RRP批准你的工作
Coordinate with the NM team to submit your construction request package (including vicinity map that clearly shows the NM rail and your work area, A-D区位置, ADS票据, 和你的施工计划)给森科公司, Zayo, 和RRP进行审查和批准,不迟于预计开工日期前60天, 适应:
- 30天评审期(设计变更可能需要额外的评审时间)
- 需要修改
- 获得多个干系人的批准
- 完成RTD许可协议和进入权(ROE)许可
- 安排所需的施工协调和施工前会议.
电子邮件 (电子邮件保护) 或打电话 303-299-2828 协调您的请求.
如果建议的工作是在A-D领域, 您有责任从BNSF获得以下文件,并向RTDC-NM组提供证明:
- BNSF鱼子
- E-铁路安全
In order to apply for a CRT-NM Access Permit to be in or work on any part of the NM rail or project areas, 您必须将您的请求包通过电子邮件发送到CRT-NM组 (电子邮件保护). 您有责任申请您的RRP轨道分配许可证. You must also attend a CRT-NM RRP Daily Game Plan meeting one full week in advance of your desired construction start date to coordinate your construction work with other work in the area and to request your RRP Track Allocation Permit. 这个会议在下午一点举行.m. (NM的建筑场地办公室位于科罗拉多州丹佛市斯蒂尔街8370号).
RTDC-EAGLE(适用于所有A、B、G线走廊)
在申请rt - eagle进入许可或在任何RTDC-EAGLE走廊上工作之前, you must attend a monthly third party meeting at least 30 days prior to the desired start date for construction.
以申请CRT-EAGLE进入许可, 您必须将填妥的电子RTDC-DTO通勤铁路通行申请/许可证表格电邮至 (电子邮件保护) or (电子邮件保护) 不得迟于要求开工日期前整整两周. 除了, you must attend the CRT-DTO Track Usage 铁路 Construction Meeting at least one full week before construction at the CRMF building in the Mezz Breakroom (typically held on Thursdays at 1:30 p.m.,请致电720-460-5803或发邮件预约出席时间). 如果没有代表出席会议,该请求将不予批准.
在阴极射线管(CRT- nm及CRT- dto)上进行认可工作
在收到所有必要的批准后, the work may be completed in accordance with the cautions and conditions indicated on the approved CRT access permit.
Work can begin when all personnel that will be in the ROW have completed the appropriate RTDC (NM or EAGLE) Safety Training and the certifications have not expired. The completed and approved CRT access permit must be in the possession of the work party at the worksite.
Proof of valid RTDC Safety Training must be provided the appropriate RTDC team (NM or EAGLE) prior to the required Construction Coordination meeting (Daily Game Meeting for NM or the Pre-Entry Meeting for EAGLE).
铁路安全培训
RTD设施访问政策
停止! 你有吗? 批准的RTD协议 在适当的位置? 所有请求必须以RTD不动产开头.
申请设施进入许可
为了在RTD的任何物业或设施中获得BGAP或工作, 填写完整的电子RTD BGAP申请表必须通过电子邮件发送至 (电子邮件保护) 不迟于要求开工日期前5天.
在RTD设施上执行批准的工作
在收到所有必要的批准后, the work may be completed in accordance with the cautions and conditions indicated on the approved BGAP form. 承包商必须通知RTD设施(工程和维护) 303-299-2977 在进入场地之前和再次清理场地时.
RTD总线路线访问策略
RTD在区内经营172条巴士路线,其中约80条泊车服务及9条,077个巴士站. Construction projects in local jurisdiction streets can impact 公交线路 and can cause safety hazards to passengers. RTD将乘客安全和服务可靠性放在首位. 工作必须随时与RTD总线运营部门协调:
- 工作风险对公交路线、停车换乘或公交车站有影响
- 工作将由承包商在任何RTD总线设施上、上面或下面进行
- Work is being performed by maintenance/engineering that may impact RTD passengers from safely accessing 公共汽车 设施
- 工作需要临时、短期或长期搬迁巴士站或巴士路线.
联络RTD巴士营运部:
电子邮件: (电子邮件保护)
电话:303-299-6928